Barcelona, Spain - February 16, 2009 – Surf Communication Solutions, a leading developer of high-capacity multimedia processing DSP boards for the telecommunication industry, today showcased an industry first open-standard, commercial-off-the-shelf (COTS) based, Media Gateway solution that bridges the worlds of NGN and legacy TDM networks.

Wintegra and PMC-Sierra Raise the Bar in T1/E1 Transport over Carrier Ethernet with support for 336 clock domains

Low power software configurable processor features a high-performance PCIe interface

Stretch Inc., the pioneer and leader in software configurable processors, today announced its VCC6000 Series of PCIe video capture cards. The cards, initially available in 16- and 8-channel versions, are designed for OEMs and are easily integrated with existing DVR applications and host-based compression solutions.

INT6400 chipset and Ethernet Adapter Reference Design feature new standby mode which reduces power consumption by 55% on 120V AC lines.

HomePlug AV-interoperability of confirmed P1901 Baseline provides seamless roadmap for Intellon customers.

WinIP targets burgeoning Carrier Ethernet and wireless backhaul markets with powerful protocol processing features

AnalogicTech has introduced the AAT1239-1, a high frequency, high efficiency constant current boost converter capable of driving up to10 white LEDs (WLEDs) connected in series. Designed for backlight applications in PNDs, eDictionaries, electronic photo frames and cellular handsets, the new driver IC uses AnalogicTech’s proprietary Simple Serial Control (S2CWire™) single-wire interface to dramatically reduce the display flicker that occurs with commonly-used low frequency PWM control schemes.

The processors used in video surveillance are faced with a variety of difficult computational tasks. They must run including increasingly complex tasks in real time such as video analytics algorithms, servicing of high-definition sensors, and network management. Dealing with all of these requires an architecture with a high degree of performance and flexibility. A software configurable processing engine is a good solution for this application.

The ability to radically change encoder parameters based on the scene dynamics results in higher average compression ratios.

AnalogicTech has introduced the AAT2504, an adjustable 3-channel regulator that combines a step-down converter with two low dropout linear regulators (LDOs). Targeted at mobile devices with rapidly changing feature sets, the AAT2504 allows designers to extend system functionality and still benefit from power management integration.

AnalogicTech has introduced a synchronous step-up converter that offers designers extremely high output current in a compact package. Designed to support a wide range of handheld portable applications, the AAT1217 delivers up to 100mA output from a single-cell alkaline battery input, up to 400mA from a dual-cell alkaline battery input and up to 500mA from a single-cell Lithium-Ion battery input while supporting startup as low as 0.85V.

Innovative architecture enables step-down converters to deliver high efficiency and low noise

Higher power density is a key benefit aiding engineers’ ongoing efforts to shrink their product footprint and thickness and thus build smaller micro hard disc drives, handsets, headsets, handheld instruments and other portable devices. By delivering 500mA in a tiny, 2 x 2 x 0.55mm package, AnalogicTech’s AAT1120 step-down converter allows designers to build smaller, thinner systems and still provide all the features and current found in larger footprint devices.

Power density is an increasingly important consideration in a wide variety of high performance handheld systems like smart phones, GPS systems and portable media players that use high capacity batteries. Addressing this need, a linear charger from AnalogicTech offers the industry’s highest charge-current-to-solution-footprint ratio while the integration of the company’s intelligent digital thermal loop feature enables the host system to use a high current linear charger without the risk of pulse charging the battery.

Portable system designers who want to guarantee that the battery charges at maximum available current during simultaneous system operation must typically build that functionality into the system with discrete components. By continuously monitoring the power needs of the system during operation and automatically adjusting charge current accordingly, AnalogicTech’s AAT3670 delivers the highest possible charge current to the battery and thereby minimises battery charge time, while reducing parts count, BOM and PCB board space requirements.

Many portable system designers face the daunting task of creating a high voltage (5V or higher) power bus in systems powered by a single-cell Lithium-ion battery without violating extremely tight space constraints. AnalogicTech’s AAT1210 is the industry’s first boost converter to supply this high voltage/high current source and still allow designers to use extremely small external components including inductors under 1mm in height, thus achieving a total solution less than or equal to 1mm tall.

SAN JOSE, CALIF. -- FEBRUARY 5, 2007 - Summit Microelectronics Inc., the world leader in programmable power management integrated circuits, today announced Nokia Growth Partners, the later-stage focused investment arm of Nokia, has led a growth financing investment round in the company. The $10M round includes Nokia Growth Partners contributing $4M with existing investors, Norwest Venture Partners, Pequot Capital, Bessemer Venture Partners, Hotung Capital Management, and others contributing $6M.

As a growing number of smart phones and other handheld devices operating off a single-cell lithium-ion battery add higher levels of processing power and begin to serve as central computing platforms, users are demanding connectivity to other peripheral devices. By integrating a boost converter with a current-limiting load switch, AnalogicTech’s AAT1275 power management IC allows designers to boost voltage and provide the protection needed to simply and efficiently host a USB port on these new computing-intensive convergent portable systems

Developed with space-constrained portable applications in mind, AnalogicTech’s AAT1149 high performance, fast transient, 400mA step-down converter enables the use of the industry’s latest 0603 footprint, 1mm high inductors for the smallest possible total solution size.

Ottawa, Canada. - December 6th, 2006 - Wi-Sys Communications Inc., a leading manufacturer of high performance GPS, Wireless and Satcom antennas, RF modules, Timing and Telematics solutions, today announced the launch of the WS3938 Ultra Compact 2.4 GHz Embedded & Covert Mount Antenna.

By combining a high current charge pump, backlight/keypad drivers, a high output flash driver, and two general purpose LDOs in a single 4x4mm package, and by retaining independent control of the backlight/keypad and flash functions, AnalogicTech’s AAT2842 offers portable system product developers an attractive way to lower parts count, lower the system BOM cost, and build more compact systems without compromising their design flexibility or circuit performance.

As mobile and personal electronic product designers embed higher performance cameras in their next-generation products and flash current levels increase, they need flash ICs that can protect the LEDs while delivering high power output with excellent control in a small package. By combining a flash timer and high flash current drive with 32-step digital current control, AnalogicTech’s AAT3170 delivers unprecedented ability to optimise LED flash performance for a wide variety of next generation designs while providing complete flash LED protection.

ELECTRONICA, Munich, November 14th, 2006. By combining a high performance charge pump, with backlight, flash and RGB drivers into a single 4 x 4mm IC controllable by a serial interface, AnalogicTech’s AAT2830/31 reduces parts count and system footprint, offering handset and portable system designers an exceptionally high level of integration and configurability

Advanced Analogic Technologies (AnalogicTech), a developer of power management semiconductors for mobile consumer electronic devices, and MagnaChip Semiconductor, (MagnaChip), a leading worldwide semiconductor foundry have announced the installation of AnalogicTech’s proprietary 0.35-micron multi-voltage mixed-signal ModularBCD process technology in MagnaChip’s advanced 200-mm submicron fabrication facilities in South Korea.

Designed to operate off both USB and AC adapter inputs, the AAT3686 lithium-ion/polymer dual-path battery charger IC from Advanced Analogic Technologies (AnalogicTech) features both an innovative digital thermal loop and a charge reduction loop that allows users to charge the battery with available current from the USB port while keeping the port voltage regulated. The latter feature ensures the battery charge function will not overload the USB port if other system loads share power with the port supply.

Advanced Analogic Technologies (AnalogicTech) has introduced a high output, high efficiency current-output charge pump IC for white LED flash applications. Cell phone designers embedding higher performance cameras in their next generation products need ICs capable of delivering high power output with excellent control in a small package. By combining 600mA of output current with a digital serial control interface, the AAT3172 gives designers unprecedented ability to deliver optimal LED flash performance across a wide variety of flash applications.

Advanced Analogic Technologies (AnalogicTech) has introduced a high output, high efficiency current-output charge pump IC for white LED flash applications. Cell phone designers embedding higher performance cameras in their next generation products need ICs capable of delivering high power output with excellent control in a small package. By combining 600mA of output current with a digital serial control interface, the AAT3172 gives designers unprecedented ability to deliver optimal LED flash performance across a wide variety of flash applications.

Advanced Analogic Technologies Incorporated (AnalogicTech), a developer of power management semiconductors for mobile consumer electronic devices, has announced the AAT2506 and AAT2511 step-down voltage regulators. The devices’ high current capability, rapid turn-on time, and high level of integration will help designers meet rising performance requirements while reducing footprint and component count.

Advanced Analogic Technologies Incorporated (AnalogicTech) has introduced a highly integrated battery charger IC designed to operate from USB port inputs. The AAT3688 features an innovative charge reduction loop that reduces charge time by automatically monitoring the USB port voltage and dynamically adjusting the current while the battery is charging.

Ottawa, Canada. - December 10, 2004 - Wi-Sys Communications Inc., a leading manufacturer of high performance GPS antennas, RF modules and Telematics data products, today announced the launch of two new WS3942 combined GPS/Cellular magnetic mount antennas, the WS3942-A for the North American market, and the WS3942-E for the European market.

Sunnyvale, Calif. – November 15, 2004 – Advanced Analogic Technologies, Inc. (AnalogicTech), a developer of innovative power management solutions, today announced the opening of a new product design center in the Dallas-Fort Worth metro region. Staffed with experienced semiconductor designer engineers, the facility will augment ongoing product development efforts at AnalogicTech headquarters in Sunnyvale, California.

As portable system designers develop new versions of their core designs to serve different market segments, they often need to add new features and functions but find their original controller has limited GPIO resources. With the AAT4296 and AAT4298 compact I/O expanders from Advanced Analogic Technologies (AnalogicTech), designers can control these additional functions without altering their original platform, and in the process, simplify their design, cut cost, and get to market quicker.

Ottawa, Canada. - Oct 26, 2005 - Wi-Sys Communications Inc., a leading manufacturer of high performance GPS antennas, RF modules, Telematics and Timing solutions, today announced the launch of the WS3997, a very compact, all-plastic surface mount GPS antenna.

Most of today’s handsets feature two displays, either in a clamshell design with a main display on the inside and a secondary display on the outside or in a bar design with a main display and a keypad backlight. By combining independent control of two separate banks of backlight LEDs with flash capability and a light load mode in a single device, AnalogicTech’s AAT2803 charge pump helps designers minimise power consumption while reducing component count and package size.

NORTH ANDOVER, Mass., September 28th, 2005 -- MEMSIC, Inc., the leading provider of CMOS-based MEMS accelerometers, announced today volume production availability of the MXX9000 tri-axis accelerometer available with both ratiometric and PWM outputs. The accelerometer, as is the case with all Memsic products, is offered in a RoHS compliant ceramic LCC package. The device is based on the latest generation of Memsic’s advanced thermal sensor technology and meets all of the latest performance criteria required for consumer and industrial applications. Samples are available and production shipments to customer applications have commenced.

Advanced Analogic Technologies, a developer of power management semiconductors for mobile consumer electronic devices, today introduced the AAT3175, a low noise, high frequency, current mode charge pump for white LED flash applications. As AnalogicTech’s first dedicated current mode fractional/doubler charge pump for camera flash applications, the AAT3175 is capable of driving up to three flash LEDs at 300mA total current with current sharing from a 2.7V to 5.5V source.

N. ANDOVER, Mass., September 26, 2003 __ MEMSIC, the leading provider of CMOS-based MEMS accelerometers/sensors, announced that is has been shipping production quantities of its accelerometers to Autoliv Electronics for an OEM automotive application. The accelerometer measures the roll axis of the vehicle and is used as a sensing input to determine when to deploy passenger safety devices. MEMSIC’s accelerometers are currently being used in Autoliv Electronics’ rollover modules.

Developer of power management semiconductors for mobile consumer electronic devices AnalogicTech has introduced two extremely small 1MHz step-down converters. Even though saving space is a top priority in portable systems, designers often have to compromise by using a large package when they specify a step-down converter with high output current levels. By offering 400mA and 600mA in a tiny, space-saving 2.0x2.1mm SC70JW-8 package, the converters offer designers new options for reducing device footprint.

Leading developer of innovative power management solutions Advanced Analogic Technologies (AnalogicTech„·) has introduced two compact, high efficiency step-down converters for space-constrained, wired electronic equipment applications. By using a 1MHz switching frequency to minimize the size of external components, maximizing efficiency, and integrating a complete internal compensation circuit, the converters offer better performance than traditional switchers and save considerable board space in the process.

Leading supplier of innovative power management solutions Advanced Analogic Technologies, Inc. (AnalogicTech), has introduced a high performance LDO linear regulator that is combined with a low current uP reset in half the space of two discrete devices, thus minimising board size for portable products such as cellular phones, PDAs, digital cameras, and notebook computers.

Wi-Sys Communications and Digimap Data Services Inc are pleased to announce that the Canadian Department of Fisheries and Oceans (DFO) has approved the Vessel Management System (VMS), comprised of the Wi-Sys WS7130 vessel tracking unit and the Digimap remote vessel tracking service, for fishing vessel monitoring at sea.

Developer of power management semiconductors for mobile consumer electronic devices AnalogicTech (Nasdaq: AATI) has announced two step-down voltage regulators that combine multiple voltage regulators on a single chip. The devices offer designers of portable systems the opportunity to increase integration in a footprint less than half the size of many competing solutions, while efficiently meeting application-specific power management needs.

AnalogicTech (Nasdaq: AATI), developer of power management semiconductors for mobile consumer electronic devices, has introduced a highly integrated single-cell lithium-ion/polymer battery charger IC. By bringing together a charging device, reverse blocking diode, and current sensing circuit in a small 3x3mm TDFN package, the device reduces component count in a wide range of portable, battery-powered consumer applications.

Targeted at the rapidly growing use of TFT LCDs and CCD image sensors in battery powered, handheld products, the AAT2820 charge pump regulator from AnalogicTech (Nasdaq: AATI) generates three regulated output voltages to meet the needs of an increasing number of smartphones, PDAs, and other portable devices that now integrate CCD camera chips and TFT displays that need positive and negative low-current bias supplies. By providing two regulated output voltages up to +25V and -25V, and a third regulated output voltage for logic -- all without the use of an inductor -- the device offers designers an extremely compact, low-profile solution for power regulation.

CARRIER CLASS AVAILABILITY Author: Mark Ashworth - Senior Field Application Engineer

Enclosure Management - An Introduction By Mark Ashworth & Richard Herbert, Broadband Technology 2000 Ltd

N. ANDOVER, Mass., June 9, 2004 - MEMSIC, the leading provider of CMOS-based MEMS accelerometers/sensors, announced that it has been selected to supply its thermal accelerometers product to Mitsubishi Electric for its newest handset design, the V401D for Vodafone Japan. The accelerometer will be used in several modes, and will provide inputs for a variety of applications. In the image orientation mode, the accelerometer will sense the phone position, and signal the display show the image in either portrait or landscape mode. The accelerometer will also function as a pedometer, allowing the user to count steps and measure traveled distances during anything form a slow walk to a brisk run. Future applications will include using the sensor as a game input device.

New Funds Will Help Expand Infrastructure to Support Growing Sales London, UK. - January 21, 2004 - Advanced Analogic Technologies, Inc., (AnalogicTech), a developer of innovative power management solutions, announced today that it has raised $15 million in a new round of financing. Battery Ventures, a leading venture capital firm focused on investing in information technology companies at all stages of growth, led the financing with participation from existing investors Hotung Ventures, InveStar, Maton Venture, Mosel Vitelic, and Sunsino Ventures Group. Ken Lawler, general partner with Battery Ventures, will take a seat on the company's board of directors.

MEMSIC, the leading provider of CMOS-based MEMS accelerometers/sensors, announced that it has been selected to supply its thermal accelerometers product to DS Ingegneria for use in an OEM vehicle anti-theft system for Mercedes Benz. The accelerometer will be used to detect tilt and motion on a number of Mercedes Benz models. When unwarranted motion is detected, the anti-theft system will transmit a notice to the owner via a cellular GSM link and the vehicle will be tracked via GPS.

AnalogicTech has introduced a dual-mode, high efficiency charge pump that supports both white LED backlight and camera flash applications for portable systems that run on lithium-ion/polymer batteries. Today’s handset designers want to retain independent control of LED backlighting and camera flash functions, but each increase in design complexity translates directly into higher cost. By offering independent control through a simple interface with only two input lines, the AAT2806 gives designers the basic functionality they need while minimising the complexity and cost of their design.

Ottawa, Canada. - July 12, 2005 - Wi-Sys Communications Inc., a leading manufacturer of high performance GPS antennas, RF modules and Telematics data products, today announced the launch of the new WS3940-ULD high performance combined Cellular + GPS embedded/covert Antenna.

New family of low noise amplifiers from Daico Industries provides small signal gain in 1dB increments up to +19dBm (P1dB).

Meeting the demanding cost/performance standards of today’s mass market consumer cell phones, leading developer of innovative power management solutions AnalogicTech has introduced a high efficiency, low noise, constant frequency charge pump for white LED applications. The three-channel, tri-mode charge pump provides the right balance of functionality and silicon overhead to meet the commercial and functional standards that these highly competitive consumer applications require.

CRIMSON MICROSYSTEMS MSPP-ON-A-CHIP ENABLES BROAD DEPLOYMENT OF SDH/SONET AT THE ACCESS EDGE.

WARREN, N.J., March May 10, 2005-ANADIGICS, Inc. (Nasdaq: ANAD), a leading supplier of wireless and broadband solutions, today unveiled the Company's proprietary, patent pending, commercial process for integrating heterojunction bipolar transistors (HBTs) with psuedomorphic high electron mobility transistors (pHEMTs) on a single indium gallium phosphide (InGaP) gallium arsenide (GaAs) die. ANADIGICS has utilized this process since 2003 to achieve industry-leading levels of integration and performance for new designs. ANADIGICS' HBT/pHEMT process improves talk-time and ruggedness in several of the Company's leading edge products.

Developer of innovative power management solutions AnalogicTech has introduced a multi-function, high efficiency, dual charge pump that is super efficient in low-current mode, delivering extremely low quiescent current and allowing designers to continually backlight displays while consuming minimal amounts of power.

Ottawa, Canada. - April 25, 2005 - Wi-Sys Communications Inc., a leading manufacturer of high performance GPS antennas, RF modules and Telematics solutions, today announced the launch of the WS3977 all plastic through-hole mount GPS antenna.

Developer of innovative power management solutions AnalogicTech has been certified by Samsung Electronics Co., Ltd., as an Eco-Partner Affiliate Company in its Green Procurement Program. Eco-Partners are suppliers that have fulfilled Samsung’s standards for establishing an ongoing environmental quality control system.

WARREN, N.J., April 13, 2005-ANADIGICS, Inc. (Nasdaq: ANAD), a leading supplier of wireless and broadband solutions, today announced that the Company has received production orders for the AWM6430 Indium Gallium Phosphide (InGaP) heterojunction bipolar transistor (HBT) 3.5 GHz class AB power amplifier (PA) for fixed point worldwide interoperability for microwave access (WiMAX) applications. ANADIGICS is leading the market by developing a complete portfolio of high linearity, high efficiency WiMAX power amplifiers that support next-generation 2.5 GHz and 3.5 GHz 802.16e mobile applications.

Ottawa, Canada. - April 4th, 2005 - Wi-Sys Communications Inc., a leading manufacturer of high performance GPS antennas, RF modules and Telematics data products, today announced the launch of the WS3916 and the WS3917 low price magnet mount GPS antenna series.

Developer of innovative power management solutions Advanced Analogic Technologies Incorporated (AnalogicTech) has announced the opening of two new offices in Beijing and Shenzhen, China. The new facilities reinforce the company’s strategy to deliver highly responsive, localised service in Asia for the design and manufacturing of portable electronic systems.

Ottawa, Canada. - March 24th, 2005 - Wi-Sys Communications Inc., a leading manufacturer of high performance GPS antennas, RF modules and Telematics data products, today announced the launch of the WS3957/WS3967 low price embedded GPS antenna series.

Developer of innovative power management solutions AnalogicTech has introduced its first multi-function charge pump device. The AAT2801 high efficiency charge pump supports both white LED backlight and white LED camera flash applications for portable systems powered by lithium-ion/polymer batteries. Driving up to four LEDs and delivering up to 30mA on each current source output, the device offers significant space savings to OEMs building mobile phones, smart phones, and PDAs.

An RGB LED (or full-color LED) is a component with Red, Green, and Blue LEDs in one package. By mixing the basic colors Red, Green, and Blue, all other colors can be created. Developments in recent years have made RGB LEDs smaller, brighter, and cheaper, which makes them very popular for use in mobile phones.

Developer of innovative power management solutions AnalogicTech has appointed Jun-Wei Chen as Vice President of Technology. With decades of experience in CMOS, BiCMOS, and DMOS process technology development at some of the leading companies in the industry, Chen has the senior-level expertise required to lead AnalogicTech’s dedicated technical organization.

Broadband Technology and Sigem Support World Electric Land Speed Record Attempt.

Every device in developer of innovative power management solutions AnalogicTech’s product portfolio is now available in RoHS compliant, lead-free packaging. The lead-free packages enable OEMs to sell end-products into markets where environmental regulations prohibit the use of lead in both packaging and circuit board manufacturing.

Ottawa, Canada. - February 21, 2005 - Wi-Sys Communications Inc., a leading manufacturer of high performance GPS antennas, RF modules and Telematics data products, today introduced four new RF Inline Amplifier modules.

Developer of innovative power management solutions AnalogicTech has announced a lithium-ion/polymer linear battery charger with an integrated pass device. Particularly in portable consumer applications like MP3 players and PDAs, space is always a scarce commodity. So by integrating the pass device into the battery charger, the AAT3682 reduces external parts count and in the process, reduces the system footprint.

As portable system processors and chipsets continue to push operating voltages lower with each new generation, they need load switches capable of supporting lower voltages. By integrating slew rate control, support for 1.5V input, and an extremely low quiescent current, AnalogicTech’s AAT4280A family of integrated load switches gives designers the control they need to drive down power consumption and build a more competitive portable product.

Developer of innovative power management solutions AnalogicTech has introduced a DC/DC converter with architecture that features full internal compensation, reducing the need for external components and conserving valuable board space. The latest addition to AnalogicTech’s extensive converter family, the AAT1152 fully integrated 850kHz 1A buck DC/DC converter also includes a Power OK (POK) function that monitors the output, alerting the system if the output voltage falls out of regulation.